With the PIN2DMD project you get a full color LED DMD controller for real and virtual pinball machines. The project was started by Lucky1 and shortly after that joined by Steve45 as co-author. Version ...

Waveshare’s RP2350-Matrix is a Raspberry Pi RP2350A-powered LED matrix board featuring 64 RGB LEDs (8×8 RGB matrix), a built-in 6-axis IMU, and a Dout pin in case the user needs even more LEDs. The ...

The PAP slate of candidates for Sengkang GRC (from left) Assoc Prof Elmie Nekmat, Ms Theodora Lai, Dr Lam Pin Min and Mrs Bernadette Giam pose for a photograph at PAP's Sengkang West Branch on Apr 13, ...

Microcontroller port pins can typically be driven either high or low, or else be put into an "input" or high-impedance state. This circuit uses the three states to drive two separate LEDs with one ...

Abstract: This work investigates the proton irradiation effect on a kV-class vertical GaN-on-GaN PiN diode under 10-MeV and 50-MeV proton irradiation with fluence up to $1\times 10^{{14}}$ cm−2. After ...

A random number generation is very important in computing devices which helps them to do task in random manner. In the Arduino IDE with the IndusBoard, generating random numbers involves seeding the ...

Recently, I was working on a project that needed a couple of LEDs on its front panel for status indication. I realize many, if not most, pieces of electronic equipment now use graphic LCDs, Bluetooth ...

Eight-pin microcontrollers offer numerous peripheral features. However, the maximum number of I/O pins available is often limited to six, since two pins would be required for the chip's power supply.

Abstract: The continuous mechanical Mini-LED chip mass transfer approach is greatly attractive for the rapidly growing Mini-LED display applications. Compared with the traditional intermittent eject ...